Opening and closing windows with the mechanical key
The driver’s door key operation also allows you to open and close the window that is equipped with the automatic open/close function. (See “Power windows” in the “2. Instruments and controls” section).
To open the windows, turn the driver’s door key cylinder to unlock for longer than 1 second. The door is unlocked and the window keeps opening while turning the key.
This function can also be performed by pushing and holding the door UNLOCK button of the key. (See “Remote keyless entry system” later in this section.) To close the windows, turn the driver’s door key cylinder to lock for longer than 1 second. The door is locked and the window keeps closing while turning the key.
See also:
Parking brake
- Be sure the parking brake is fully released before driving. Failure to do
so can cause brake failure and lead to an accident.
- Do not release the parking brake from outside the vehicle.
- Do ...
Heated seats (if so equipped)
The front seats are warmed by built-in heaters.
1. Start the engine.
2. Push the LO or HI position of the switch, as
desired. The indicator light in the switch will
illuminate.
The heater is ...
Liftgate position setting
The liftgate can be set to open to a specific height
by performing the following:
1. Open the liftgate using the request switch or
the Intelligent Key.
2. Pull the liftgate down to the desired pos ...