Battery saver system

When all the following conditions are met for a period of time, the battery saver system will cut off the power supply to prevent battery discharge.

The ignition switch is in the ACC position, and
All doors are closed, and
The shift lever is in the P (Park) position.

    See also:

    Starting the engine
    1. Apply the parking brake. 2. Move the selector lever to the P (Park) or N (Neutral) position. (P is recommended.) The starter is designed so that it does not operate unless the selector lever is ...

    Power inverter switch (if so equipped)
    To use the outlets for devices that require 120v power, place the ignition in the ON position and push the power inverter switch. The switch will illuminate when enabled. CAUTION ● Use ...

    Maximum load limits
    Maximum trailer loads Never allow the total trailer load to exceed the maximum value listed in the "Towing Load/Specification" chart provided in this section. The applicable limit must be observe ...