Operating manual lift gate

To open the lift gate, unlock it and push the opener switch A . Pull up the lift gate to open.

The lift gate can be unlocked by:

• pushing the unlock button on the Intelligent Key twice.
• pushing the lift gate request switch (if so equipped).
•  pushing the door handle request switch twice (if so equipped).
• pushing the power door lock switch to the unlock position.
• inserting the mechanical key into the driver’s door key cylinder and turning it to the rear of the vehicle twice.

To close the lift gate, pull down until it securely locks.

    See also:

    All-Wheel Drive (AWD) lock switch operations
    The AWD LOCK switch is located on the lower side of the instrument panel (CrossCabriolet models) or on the center console (Hardtop models). This switch is used to select the AUTO or LOCK mode de ...

    Maintenance precautions. Engine compartment check locations
    Maintenance precautions Whenever you inspect or perform maintenance on your Nissan Murano, work carefully and follow appropriate safety procedures to reduce the risk of accidental injury or vehicle ...

    Rapid air pressure loss
    Rapid air pressure loss or a “blow-out” can occur if the tire is punctured or is damaged due to hitting a curb or pothole. Rapid air pressure loss can also be caused by driving on underinflated ...