Auto closure
If the lift gate is pulled down to a partly open position, the lift gate will pull itself to the closed position.
Do not apply excessive force when the auto closure is operating. Excessive force applied may cause the mechanism to malfunction.
CAUTION
• The lift gate will automatically
close
from a partly open position. To avoid
pinching, keep hands and fingers
away from lift gate opening.
• Do not let children operate the lift
gate.
See also:
View malfunction
When the “!” icon is displayed on the screen, the
Around View Monitor may not be calibrated correctly.
This will not hinder normal driving function
but the system should be inspected by a N ...
Changing engine oil filter
1. Park the vehicle on a level surface and apply
the parking brake.
2. Turn the engine off.
3. Place a large drain pan under the oil filter A .
4. Loosen the oil filter A with an oil filter
wre ...
Environmental factors influence the rate of corrosion
Moisture
Accumulation of sand, dirt and water on the vehicle
body underside can accelerate corrosion.
Wet floor coverings will not dry completely inside
the vehicle and should be removed for dry ...