BSW/LDW automatic deactivation
When dirt, rain or snow cannot be removed by the automatic washer and blower and accumulates on the camera, making it impossible to detect the vehicles or the lane markers, the BSW and/or LDW system will be turned off automatically. The BSW light (green) and/or LDW light (green) will blink, and the “Unavailable : Clean rear camera” will appear in the dot matrix liquid crystal display.
Action to take:
If the message appears, park the vehicle in a safe place, clean the camera unit with a soft cloth. Then turn off and restart the engine.
See also:
If the top does not open or close electrically
If you cannot operate the soft top with the
operating switch, first check whether all the
following operating conditions are met.
• Vehicle is stopped
• Ignition switch is ON (Run the engine w ...
Reporting safety defects
For USA
If you believe that your vehicle has a defect which could cause a crash or could
cause injury or death, you should immediately inform the National Highway Traffic
Safety Administration (N ...
Vehicle recovery (freeing a stuck vehicle)
Tie down and recovery hook
WARNING
• Stand clear of a stuck vehicle.
• Do not spin your tires at high speed.
This could cause them to explode
and result in serious injury. Parts of
your ...