General maintenance
General maintenance includes those items which should be checked during normal dayto- day operation. They are essential for proper vehicle operation. It is your responsibility to perform these procedures regularly as prescribed.
Performing general maintenance checks requires minimal mechanical skill and only a few general automotive tools.
These checks or inspections can be done by yourself, a qualified technician or, if you prefer, a NISSAN dealer.
See also:
Automatic operation (if so equipped)
Tilt and telescopic operation
To adjust the steering wheel move the switch 1
in the following directions:
● Adjust the steering wheel forward or backward
in direction 3 to the desired telesc ...
Temperature A, B and C
The temperature grades A (the highest), B, and
C, representing the tire’s resistance to the
generation of heat and its ability to dissipate
heat when tested under controlled conditions on
a spec ...
Underbody
In areas where road salt is used in winter, the
underbody must be cleaned regularly. This will
prevent dirt and salt from building up and
causing the acceleration of corrosion on the
underbody and ...