Power steering fluid

Check the fluid level in the reservoir.

Check the fluid level in the reservoir.

The fluid level should be checked using the HOT range (1 : HOT MAX.,3 : HOT MIN.) at fluid temperatures of 122 to 1768F (50 to 808C) or using the COLD range (2 : COLD MAX.,3 : COLD MIN.) at fluid temperatures of 32 to 868F (0 to 308C).

If the fluid is below the MIN line, add Genuine NISSAN PSF or equivalent. Remove the cap and fill through the opening.

CAUTION

• Do not overfill.
• Use Genuine NISSAN PSF or equivalent.

    See also:

    Basic information
    The heater and automatic air conditioner in the Nissan Murano can be operated using either the physical control panel buttons 2 or the corresponding keys displayed on the climate control ...

    Push starting
    CAUTION ● CVT models cannot be push-started or tow-started. Attempting to do so may cause transmission damage. ● Do not push start this vehicle. The three-way catalyst may be damaged. ...

    I-LI system limitations
    WARNING The operating limitations of the Intelligent Lane Intervention system are described below. Failure to understand these restrictions or follow the instructions for proper use of the I-LI sy ...