Tow mode switch

Tow mode should be used when pulling a heavy

Tow mode should be used when pulling a heavy trailer or hauling a heavy load. Driving the vehicle in the tow mode with no trailer/load or light trailer/light load will not cause any damage. However, fuel economy may be reduced, and the transmission/engine driving characteristics may feel unusual.

Press the tow mode switch to activate tow mode.

The indicator light on the instrument panel illuminates when tow mode is selected. Press the tow mode switch again to turn tow mode OFF.

Tow mode is automatically canceled when the ignition switch is placed in the OFF position.

For additional information, refer to “Tow mode” in the “Technical and consumer information” section later in this manual.

    See also:

    Engine block heater (if so equipped)
    Engine block heaters are used to assist with cold temperature starting. The engine block heater should be used when the outside temperature is 208F (−78C) or lower. To use the engine blo ...

    Storages
    Cup holders - Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger. - Use only soft cups in ...

    Liftgate position setting
    The liftgate can be set to open to a specific height by performing the following: 1. Open the liftgate using the request switch or the Intelligent Key. 2. Pull the liftgate down to the desired pos ...