Break-in schedule

During the first 1,200 miles (2,000 km), follow these recommendations to obtain

During the first 1,200 miles (2,000 km), follow these recommendations to obtain maximum engine performance and ensure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in shortened engine life and reduced engine performance.

- Avoid driving for long periods at constant speed, either fast or slow. Do not run the engine over 4,000 rpm.

- Do not accelerate at full throttle in any gear.

- Avoid quick starts.

- Avoid hard braking as much as possible.

- Do not tow a trailer for the first 500 miles (800 km). Your engine, axle or other parts could be damaged.

    See also:

    Environmental factors influence the rate of corrosion
    Moisture Accumulation of sand, dirt and water on the vehicle body underside can accelerate corrosion. Wet floor coverings will not dry completely inside the vehicle, and should be removed for d ...

     OFF button
    Switch beeps With this option on (indicator light illuminated), a beep will sound if any control panel button is pressed. To change the display brightness, press the OFF button. Pressing the b ...

    Continuously Variable Transmission (CVT) fluid
    CAUTION • Use only Genuine NISSAN CVT Fluid NS-3. Do not mix with other fluids. • Using transmission fluid other than Genuine NISSAN CVT Fluid NS-3 will damage the CVT, which is not covered ...