Vehicle Dynamic Control (VDC) system

The Vehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving conditions, the VDC system helps to perform the following functions.

- Controls brake pressure to reduce wheel slip on one slipping drive wheel so power is transferred to a non slipping drive wheel on the same axle.

- Controls brake pressure and engine output to reduce drive wheel slip based on vehicle speed (traction control function).

- Controls brake pressure at individual wheels and engine output to help the driver maintain control of the vehicle in the following conditions:
— understeer (vehicle tends to not follow the steered path despite increased steering input)
— oversteer (vehicle tends to spin due to certain road or driving conditions).

The VDC system can help the driver to maintain control of the vehicle, but it cannot prevent loss of vehicle control in all driving situations.

When the VDC system operates, the VDC warning light note the following: in the instrument panel flashes so note the following:
- The road may be slippery or the system may determine some action is required to help keep the vehicle on the steered path.

- You may feel a pulsation in the brake pedal and hear a noise or vibration from under the hood. This is normal and indicates that the VDC system is working properly.

- Adjust your speed and driving to the road conditions.

See “Vehicle Dynamic Control (VDC) warning light” in the “2. Instruments and controls” section.

If a malfunction occurs in the system, the VDC warning light The VDC system automatically turns off. illuminates in the instrument panel. The VDC system automatically turns off.

The VDC OFF switch is used to turn off the VDC system. The VDC off indicator is off. When the VDC switch is used to turn off the system, the VDC system still illuminates to indicate the VDC system is off. When the VDC switch is used to turn off the system, the VDC system still operates to prevent one drive wheel from slipping by transferring power to a non slipping drive wheel. The VDC warning light functions are off, and the VDC warning light flashes if this occurs. All other VDC functions are off, and the VDC warning light reset to on when the ignition switch is placed in the off position then back to will not flash. The VDC system is automatically reset to on when the ignition switch is placed in the off position then back to the on position.

See“Vehicle Dynamic Control (VDC) warning light” in the “2. Instruments and controls” section and “Vehicle Dynamic Control (VDC) off indicator light” in the “2. Instruments and controls” section.

The computer has a built-in diagnostic feature that tests the system each time you start the engine and move the vehicle forward or in reverse at a slow speed. When the self-test occurs, you may hear a “clunk” noise and/or feel a pulsation in the brake pedal. This is normal and is not an indication of a malfunction.

- The VDC system is designed to help the driver maintain stability but does

- The VDC system is designed to help the driver maintain stability but does not prevent accidents due to abrupt steering operation at high speeds or by careless or dangerous driving techniques. Reduce vehicle speed and be especially careful when driving and cornering on slippery surfaces and always drive carefully.

- Do not modify the vehicle’s suspension.

If suspension parts such as shock absorbers, struts, springs, stabilizer bars, bushings and wheels are not NISSAN recommended for your vehicle or are extremely deteriorated, the VDC system may not operate properly.

This could adversely affect vehicle handling performance, and the VDC warning light - If brake related parts such as brake pads, rotors and calipers are not NISSAN may illuminate.

- If brake related parts such as brake pads, rotors and calipers are not NISSAN recommended or are extremely deteriorated, the VDC system may not operate properly and the VDC warning light illuminate. may illuminate.

- If engine control related parts are not NISSAN recommended or are extremely deteriorated, the VDC warning light - When driving on extremely inclined surfaces such as higher banked corners, may illuminate.

- When driving on extremely inclined surfaces such as higher banked corners, the VDC system may not operate properly and the VDC warning light these types of roads. may illuminate. Do not drive on these types of roads.

- When driving on an unstable surface such as a turntable, ferry, elevator or ramp, the VDC warning light may illuminate. This is not a malfunction. Restart the engine after driving onto may illuminate. This is not a malfunction. Restart the engine after driving onto a stable surface.

- If wheels or tires other than the NISSAN recommended ones are used, the VDC system may not operate properly and the VDC warning light - The VDC system is not a substitute for winter tires or tire chains on a snow may illuminate.

- The VDC system is not a substitute for winter tires or tire chains on a snow covered road.

    See also:

    Forward-facing child restraint installation using the seat belts
    WARNING • The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not ...

    Seatback pockets
    There are two seatback pockets located on the back of the driver and passenger seats. The pockets can be used to store maps. ...

    Getting started
    The following procedures will help you get started using the Bluetooth® Hands-Free Phone System with NISSAN Voice Recognition. For additional command options, refer to “List of voice commands ...