Draining of coolant water
If the vehicle is to be left outside without antifreeze, drain the cooling system, including the engine block. Refill before operating the vehicle.
For details, see “Changing engine coolant” in the “Maintenance and do-it-yourself” section of this manual.
See also:
Readiness for Inspection/Maintenance (I/M) test
A vehicle equipped with All-Wheel Drive (AWD) should never be tested using a
two wheel dynamometer (such as the dynamometers used by some states for emissions
testing), or similar equipment. Make ...
Opening fuel-filler door
To open the fuel-filler door, push the opener
switch located below the instrument panel. To
lock, close the fuel-filler door securely. ...
Push starting
Do not attempt to start the engine by pushing.
CAUTION
Continuously Variable Transmission
(CVT) models cannot be push-started
or tow-started. Attempting to do so may
cause transmission damage. ...
