See also:

Changing a flat tire
If you have a flat tire, follow the instructions below: Stopping the vehicle 1. Safely move the vehicle off the road and away from traffic. 2. Turn on the hazard warning flashers. 3. Park on a le ...

Clearing the programmed information
Individual buttons cannot be cleared. However, to clear all programming, press and hold the two outside buttons and release when the indicator light begins to flash (approximately 20 seconds). ...

System operation
The automatic drive positioner system will not work or will stop operating under the following conditions: • When the vehicle speed is above 4 MPH (7 km/h) (entry/exit function). • When the ...