Trunk release power cancel switch

When the switch located inside the glove box is in the OFF position A , the power to the trunk lid will be canceled and the trunk lid cannot be opened by the trunk lid release switch, the trunk open request switch with the Intelligent Key carried with you or the TRUNK button on the Intelligent Key.
When you have to leave the vehicle with a valet and want to keep your belongings safe in the glove box and the trunk, push this switch to OFF and lock the glove box with the mechanical key.
Then leave the vehicle and the Intelligent Key with the valet and keep the mechanical key with you.
See “Keys” earlier in this section.
To connect the power to the trunk lid, push the switch to the ON B position.
See also:
Programming HomeLink®
If you have any questions or are having difficulty
programming your HomeLink® buttons, refer to
the HomeLink® web site at: www.homelink.com
or call 1-800-355-3515.
NOTE:
Place the ignition swit ...
2nd row bench seat adjustment
Forward and backward
Pull the center of the bar 1 up and hold it while
you slide the seat forward or backward to the
desired position. Release the bar to lock the seat
in position.
Reclining
To ...
Forward-facing child restraint
installation using the seat belts
WARNING
The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child
restraint. ALR mode allows the belt to lock after it has been routed and tightene ...
