Uniform tire quality grading

DOT (Department Of Transportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades.

Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example:

Treadwear 200 Traction AA Temperature A

See also:

Install
1. Align the head restraint/headrest stalks with the holes in the seat. Make sure the head restraint/headrest is facing the correct direction before pushing it into place. The stalk with ...

Basic information
WARNING Failure to follow the warnings and instructions for the correct use of the Intelligent Blind Spot Intervention (I-BSI) system could result in a collision, serious injury, or death. ...

Readiness for inspection/maintenance (I/M) test
WARNING A vehicle equipped with Four-Wheel Drive (4WD) should never be tested using a two wheel dynamometer (such as the dynamometers used by some states for emissions testing), or similar equipm ...