Automatic operation

Cooling and/or dehumidified heating (AUTO)

This mode may be used all year round as the system automatically works to keep a constant temperature. Air flow distribution and fan speed are also controlled automatically.

1. Press the AUTObutton on. (The indicator on the button will illuminate and AUTO will be displayed.)
2. Operate the driver’s side temperature control buttons.

● Adjust the temperature display to about 75°F (24°C) for normal operation.
● The temperature of the passenger compartment will be maintained automatically. Air flow distribution and fan speed are also controlled automatically.
● A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.

3. You can individually set driver’s and front passenger’s side temperature using each temperature control button. When the DUAL button or passenger’s side temperature button is pressed, the DUAL indicator will come on. To turn off the passenger’s side temperature control, press the DUAL button.

Heating (A/C OFF)

The air conditioner does not activate. When you need to heat only, use this mode.

1. Press the A/C button. (A/C OFF will be displayed and A/C indicator will turn off.)
2. Operate the temperature control buttons to set the desired temperature.

● The temperature of the passenger compartment will be maintained automatically. Air flow distribution and fan speed are also controlled automatically.
● Do not set the temperature lower than the outside air temperature. Otherwise the system may not work properly.
● Not recommended if windows fog up.

Dehumidified defrosting or defogging

1. Press the button on. front defroster button on.

(The indicator light on the button will come on.)
2. Operate the temperature control buttons to set the desired temperature.

● To quickly remove ice from the outside of the windows, use the fan speed control dial to set the fan speed to maximum.
● As soon as possible after the windshield is clean, press the AUTO button to return to the automatic mode.
● When the is front defroster button is pressed, the air conditioner will automatically be turned on at outside temperatures above 36°F (2°C). The air recirculate mode automatically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance.

    See also:

    Corrosion protection
    Most common factors contributing to vehicle corrosion - The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas. - Damage to paint and other protec ...

    How to read the displayed lines
    Guiding lines which indicate the vehicle width and distances to objects with reference to the vehicle body line A are displayed on the monitor. Distance guide lines: Indicate distances from the ...

    Tilt/telescopic steering
    WARNING ● Do not adjust the steering wheel while driving. You could lose control of your vehicle and cause an accident. ● Do not adjust the steering wheel any closer to you than is ne ...