Emergency engine shut off

To shut off the engine in an emergency situation while driving, perform the following procedure:

– Rapidly push the push-button ignition switch 3 consecutive times in less than 1.5 seconds, or
– Push and hold the push-button ignition switch for more than 2 seconds.

    See also:

    Environmental factors influence the rate of corrosion
    Moisture Accumulation of sand, dirt and water on the vehicle body underside can accelerate corrosion. Wet floor coverings will not dry completely inside the vehicle and should be removed for dry ...

    Engine coolant temperature gauge
    The gauge indicates the engine coolant temperature. The engine coolant temperature is within the normal range when the gauge needle points within the zone1 shown in the illustration. The eng ...

    Jump starting
    To start your engine with a booster battery, the instructions and precautions below must be followed. - If done incorrectly, jump starting can lead to a battery explosion, resulting in severe i ...