Drive belts
1. Alternator
2. Water pump
3. Drive belt auto-tensioner
4. Crankshaft pulley
5. Air conditioner compressor
Be sure the ignition switch is in the OFF or LOCK position before servicing drive belts. The engine could rotate unexpectedly.
1. Visually inspect each belt for signs of unusual wear, cuts, fraying or looseness. If the belt is in poor condition or loose, have it replaced or adjusted by a NISSAN dealer.
2. Have the belts checked regularly for condition.
See also:
BSW/LDW automatic deactivation
When dirt, rain or snow cannot be removed by
the automatic washer and blower and accumulates
on the camera, making it impossible to
detect the vehicles or the lane markers, the
BSW and/or LDW syst ...
Push starting
Do not attempt to start the engine by pushing.
Continuously Variable Transmission (CVT) models cannot be push-started or
tow-started. Attempting to do so may cause transmission damage. ...
Control panel buttons — color screen with Navigation System (if so equipped)
1. ZOOM OUT button*
2. CAMERA button**
3. DEST button*
4. ROUTE button*
5. NISSAN controller
6. STATUS button
7. INFO button
8. + (brightness control) button
9. OFF brightness control butto ...