Installing top tether strap (Hardtop models)
First, secure the child restraint with the LATCH lower anchors (rear outboard seat positions only) or the seat belt, as applicable.
1. If necessary, raise or remove the head restraint or headrest to position the top tether strap over the top of the seatback. If the head restraint or headrest is removed, store it in a secure place. Be sure to reinstall the head restraint or headrest when the child restraint is removed.
See “Head restraints” earlier in this section for head restraint or headrest adjustment, removal and installation information.
Position the top tether strap over the top of the seatback.
2. Secure the top tether strap to the tether
anchor point on the back of the seatback
behind the child restraint.
3. Refer to the appropriate child restraint
installation procedure steps in this section
before tightening the tether strap.
If you have any questions when installing a top tether strap, consult your NISSAN dealer for details.
See also:
Mirrors
Inside mirror
Inside mirror
Adjust the height and the angle of the inside mirror to the desired position.
Manual anti-glare type
The night position 1 will reduce glare from the headlights of v ...
Air cleaner
Push the tabs 1 and pull out the filter element 2 .
The air cleaner filter should not be cleaned and reused. Replace it according
to the maintenance log shown in the “NISSAN Service and Mainten ...
How to use the vehicle information display
The vehicle information display can be changed
using the buttons and ENTER located
on
the steering wheel.
1. — select/enter the Vehicle
information
menu items or to change from one displ ...