Intelligent Key operation
You can lock or unlock the doors without taking the key out from your pocket or bag.
When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle request switch A (driver’s or front passenger’s) or the lift gate request switch B within the range of operation.
When you lock or unlock the doors or the lift gate/trunk lid, the hazard indicator will flash and the horn (or the outside chime) will sound as a confirmation. For details, see “Setting hazard indicator and horn mode” later in this section.
Locking doors
1. Move the shift lever to the P (Park) position,
push the ignition switch to the OFF position
and make sure you carry the Intelligent Key
with you.1
2. Close all the doors and the lift gate.2
3. Push the door handle request switchA or
lift gate request switch B while carrying
the Intelligent Key with you.3
4. All the doors and the lift gate will lock.
5. The hazard indicator flashes twice and the
outside chime sounds twice.
1: Doors will lock with the Intelligent Key while the
ignition switch is in the ACC or ON position.
2: Doors will not lock by pushing the door handle
request switch while any door (including the lift
gate) is open.
3: Doors will not lock by pushing the door handle
request switch with the Intelligent Key inside the
vehicle.
However, when an Intelligent Key is inside the vehicle, doors can be locked with another registered Intelligent Key.
CAUTION
• After locking the doors using the
request switch, make sure that the
doors have been securely locked by
operating the door handles.
• When locking the doors using the
request switch, make sure to have
the Intelligent Key in your possession
before operating the request
switch to prevent the Intelligent Key
from being left in the vehicle.
• The request switch is operational
only when the Intelligent Key has
been detected by the Intelligent Key
system.
Lockout protection:
To prevent the Intelligent Key from being accidentally locked in the vehicle, lockout protection is equipped with the Intelligent Key system.
When the driver’s side door is open, the doors are locked, and then the Intelligent Key is put inside the vehicle and all the doors are closed; the lock will automatically unlock and the door buzzer sounds.
NOTE:
The doors may not lock when the Intelligent Key is in the same hand that is operating the request switch to lock the door. Put the Intelligent Key in a purse, pocket or your other hand.
CAUTION
The lockout protection may not function under the following conditions:
• When the Intelligent Key is placed
on top of the instrument panel.
• When the Intelligent Key is placed
inside the glove box or a storage
bin.
• When the Intelligent Key is placed
inside the door pockets.
• When the Intelligent Key is placed
on or under the spare tire area.
• When the Intelligent Key is placed
on the outer side of trunk area.
• When the Intelligent Key is placed
inside or near metallic materials.
Unlocking doors
1. Push the door handle request switchA or
the lift gate request switch B once while
carrying the Intelligent Key with you.
2. The hazard indicator flashes once and the
outside chime sounds once. The corresponding
door or the lift gate will unlock.
3. Push the request switch again within 1
minute.
4. The hazard indicator flashes once and the
outside chime sounds once again. All the
doors and the lift gate will unlock.
All doors will be locked automatically unless one of the following operations is performed within 1 minute after pushing the request switch while the doors are locked. If during this 1-minute time period, the request switch is pushed, all doors will be locked automatically after another 1 minute.
• Opening any door (including the
lift gate)
• Pushing the ignition switch
• Inserting the Intelligent Key into
the Intelligent
Key port
During this 1-minute time period, if the UNLOCK button on the Intelligent Key is pushed, all doors will be locked automatically after another 1 minute.
Power lift gate open (if so equipped)
1. Carry the Intelligent Key.
2. Push the power lift gate opener switch C .
3. The lift gate will unlock and automatically
open.
4. The hazard indicator flashes 4 times and the
outside chime sounds.
To close the lift gate, push the power lift gate button on the key, or power lift gate switch on the instrument panel or lower part of the lift gate.
(See “Lift gate (Hardtop models)” in the “3. Predriving checks and adjustments” section.)
CrossCabriolet models
Opening trunk lid (CrossCabriolet models)
1. Push the trunk open request switch D for
more than 1 second.
2. The trunk will unlatch. An outside chime will
sound four times.
3. Raise the trunk lid to open the trunk.
Lockout protection:
To prevent the Intelligent Key from being accidentally locked in the trunk, lockout protection is equipped with the Intelligent Key system.
When the trunk lid is closed with the Intelligent Key inside the trunk, the outside buzzer will sound and the trunk will open.
See also:
Rear window wiper and washer switch
WARNING
In freezing temperatures the washer solution
may freeze on the window and obscure
your vision. Warm the rear window
with the defroster before you wash the
rear window.
CAUTION
● D ...
Fuel-filler cap
WARNING
● Gasoline is extremely flammable and
highly explosive under certain conditions.
You could be burned or seriously
injured if it is misused or mishandled.
Always stop the engine ...
Sunglasses holder (Hardtop models)
WARNING
Keep the sunglasses holder closed
while driving to prevent an accident.
To open the sunglasses holder, push1 .
CAUTION
• Do not use
for anything other than
glasses.
• Do not lea ...