System operation
The automatic drive positioner system will not work or will stop operating under the following conditions:
• When the vehicle speed is above 4 MPH
(7
km/h) (entry/exit function).
• When the vehicle is driven (memory
storage).
• When the adjusting switch for the driver’s
seat and steering column (if so equipped) is
turned on while the automatic drive positioner
is operating.
• When the seat, steering column (if so
equipped) and outside mirrors have already
been moved to the memorized position.
• When no position is stored in the memory
switch.
• When the engine is started while moving
the
automatic drive positioner.
• When the shift lever is moved from the P
(Park) position to any other position. (However,
it will not be canceled while the seat
and steering column are returning to the
previous positions (entry/exit function).)
• When the driver’s door remains open for
more than 45 seconds and the ignition
switch is not in the ON position.
See also:
Seat belt maintenance
● To clean the seat belt webbing, apply a
mild soap solution or any solution recommended
for cleaning upholstery or carpet.
Then wipe with a cloth and allow the seat
belts to dry in the sh ...
Readiness for Inspection/Maintenance (I/M) test
WARNING
A vehicle equipped with All-Wheel Drive
(AWD) should never be tested using a
two wheel dynamometer (such as the
dynamometers used by some states for
emissions testing), or similar equipme ...
Windshield wiper and washer switch
WARNING
In freezing temperatures the washer solution
may freeze on the window and obscure
your vision which may lead to an
accident. Warm the window with the defroster
before you wash the window. ...