Operating tips
• When the shift lever is shifted to the
R
(Reverse) position, the monitor screen automatically
changes to the RearView Monitor
mode. However, the radio can be heard.
• When the temperature is extremely high or
low, the screen may not clearly display
objects. This is not a malfunction.
• When strong light directly enters the
camera,
objects may not be displayed clearly.
This is not a malfunction.
• Vertical lines may be seen in objects on
the
screen. This is due to strong reflected light
from the bumper. This is not a malfunction.
• The screen may flicker under fluorescent
light. This is not a malfunction.
• The colors of objects on the RearView
Monitor may differ somewhat from the actual
color of objects. This is not a malfunction.
• Objects on the monitor may not be clear in
a
dark environment. This is not a malfunction.
• If dirt, rain or snow accumulates on the
camera, the RearView Monitor may not
display object clearly. Clean the camera.
• Do not use alcohol, benzine or thinner to
clean the camera. This will cause discoloration.
To clean the camera, wipe with a cloth
dampened with diluted mild cleaning agent
and then wipe with a dry cloth.
• Do not damage the camera as the monitor
screen may be adversely affected.
• Do not use wax on the camera window.
Wipe off any wax with a clean cloth
dampened with mild detergent diluted with
water.
• The MOD system will not operate if the
washer fluid is at a low level. Refill the
washer fluid if the level is low. (See
“Window washer fluid” in the “8. Maintenance
and do-it-yourself” section.)
See also:
All-Wheel Drive (AWD) lock switch operations
The AWD LOCK switch is located on the lower
side of the instrument panel (CrossCabriolet
models) or on the center console (Hardtop
models). This switch is used to select the AUTO
or LOCK mode de ...
Forward-facing child restraint installation using the seat belts
WARNING
The three-point seat belt with Automatic
Locking Retractor (ALR) must be used
when installing a child restraint. Failure to
use the ALR mode will result in the child
restraint not being p ...
Troubleshooting guide
The system should respond correctly to all voice
commands without difficulty. If problems are encountered,
try the following solutions.
Where the solutions are listed by number, try
each solutio ...