Automatic operation
Cooling and/or dehumidified heating (AUTO)
This mode may be used all year round. The system works automatically to control the inside temperature, air flow distribution and fan speed after the preferred temperature is set manually.
1. Push the “AUTO” button on. (The indicator
on the button will illuminate and AUTO will
be displayed.)
2. Operate the driver side temperature control
buttons (type A) or dial (type B) to set the
desired temperature.
Adjust the temperature to about 758F (248C) for normal operation.
• The temperature of the passenger compartment will be maintained automatically.
Air flow distribution and fan speed will also be controlled automatically.
3. You can individually set driver and front passenger side temperature using each temperature control buttons (type A) or dial (type B). When the “DUAL” button is pushed or the passenger side temperature control buttons (type A) or dial (type B) is/are operated, the DUAL indicator will come on.
To turn off the passenger side temperature control, push the “DUAL” button.
A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.
Heating (A/C OFF)
The air conditioner does not activate in this mode. When you need to heat only, use this mode.
1. Push the “A/C” button. (The A/C indicator
will turn off.)
2. Operate the temperature control buttons
(type A) or dial (type B) to set the desired
temperature.
• The temperature of the passenger
compartment
will be maintained automatically. Air
flow distribution and fan speed are also
controlled automatically.
• Do not set the temperature lower than the
outside air temperature. Otherwise the
system may not work properly.
• Not recommended if windows fog up.
Dehumidified defrosting or defogging
1. Push the “ ” front defroster
button. (The
indicator light on the button will come on.)
2. Operate the temperature control buttons
(type A) or dial (type B) to set the desired
temperature.
• To quickly remove ice from the outside
of the
windows, turn the “ ” fan speed
control
dial and set it to the maximum position.
• As soon as possible after the windshield
is
clean, push the “AUTO” button to return to
the auto mode.
• When the “
” front defroster button is
pushed, the air conditioner will automatically
be turned on at outside temperatures above
238F (−58C) to defog the windshield, and
the air recirculate mode will automatically be
turned off.
Outside air is drawn into the passenger compartment to improve the defogging performance.
See also:
Push-Button Ignition Switch
WARNING
Do not operate the push-button ignition
switch while driving the vehicle except in
an emergency. (The engine will stop when
the ignition switch is pushed 3 consecutive
times in quick succ ...
Operating the power liftgate (if so equipped)
Liftgate opener switch
WARNING
● Make sure that all passengers have
their hands, etc., inside the vehicle before
closing the liftgate.
● Do not leave children unattended inside
the ...
Seat belts with pretensioners (front seats)
WARNING
• The
pretensioners cannot be reused
after activation. They must be replaced together with the retractor
and buckle as a unit.
• If the vehicle
becomes involved in a
collision but ...