Voice adaptation mode
The Voice Adaptation mode allows up to two users with different dialects to train the system to improve recognition accuracy. By repeating a number of commands, the users can create a voice model of their own voice that is stored in the system. The system is capable of storing a different voice adaptation model for each connected phone.
Training procedure
1. Position the vehicle in a reasonably quiet
outdoor location.
2. Sit in the driver’s seat with the engine
running, the parking brake on, and the
transmission in Park.
3. Press the button.
4. Speak: “Help”. The system acknowledges
the command and announces the next set of
available commands.
5. Speak: "Voice Adaptation". The system
acknowledges the command and displays
the voice adaptation mode screen.
6. Voice memory A or memory B is selected
automatically. If both memory locations are
already in use, the system will prompt you to
overwrite one. Follow the instructions provided
by the system.
7. When preparation is complete and you are
ready to begin, press the button.
8. The voice adaptation mode will be explained.
Follow the instructions provided by
the system.
9. When training is finished, the system will tell
you an adequate number of phrases have
been recorded.
10. The system will ask you to say your name.
Follow the instructions to register your
name.
11. The system will announce that voice adaptation
has been completed and the system is
ready.
The voice adaptation mode will stop if:
• The
button is pressed in voice
adaptation
mode.
• The vehicle is driven during voice
adaptation
mode.
• The ignition switch is placed in the OFF
or
LOCK position.
See also:
Programming HomeLink®
If you have any questions or are having difficulty
programming your HomeLink® buttons, refer to
the HomeLink® web site at: www.homelink.com
or call 1-800-355-3515.
NOTE:
It is also recommended ...
Precautions on child restraints
WARNING
•
CrossCabriolet models are not
equipped with top tethers. A child
restraint system requiring a top
tether strap cannot be properly installed
and should not be used in
your vehic ...
Making a call
To make a call, follow the procedures below.
1. Push the button on the
steering wheel.
A tone will sound.
2. Speak: “Call”. The system acknowledges
the command and announces the next se ...