Intelligent Key battery discharge
If the battery of the Intelligent Key is almost discharged, the guide light B of the key port A blinks and the indicator appears on the dot matrix liquid crystal display. (See “Dot matrix liquid crystal display” in the “2. Instruments and controls” section.) In this case, inserting the Intelligent Key into the port A allows you to start the engine. Make sure that the key ring side faces backward as illustrated. Insert the Intelligent Key in the port until it is latched and secured.
To remove the Intelligent Key from the port, push the ignition switch to the OFF position and pull the Intelligent Key out of the port.
NOTE:
The key port does not charge the key battery. If you see the low battery indicator in the dot matrix liquid crystal display, replace the battery as soon as possible.
(See “Intelligent Key battery replacement” in the “8. Maintenance and do-it-yourself” section.)
CAUTION
• Never place anything except the
Intelligent Key in the key port. Doing
so may cause damage to the equipment.
• Make sure the Intelligent Key is in
the correct direction when inserting
it to the key port. The engine may
not start if it is in the incorrect
direction.
• Remove the Intelligent Key from the
key port after the ignition switch is
pushed to the OFF position.
See also:
Seat belts with pretensioners (front seats)
WARNING
• The
pretensioners cannot be reused
after activation. They must be replaced together with the retractor
and buckle as a unit.
• If the vehicle
becomes involved in a
collision but ...
Window washer fluid
Fill the window washer fluid reservoir periodically.
Add window washer fluid when the low
window washer fluid warning appears on the dot
matrix liquid crystal display.
To fill the window was ...
Traction AA, A, B and C
The traction grades, from highest to lowest, are
AA, A, B and C. Those grades represent the
tire’s ability to stop on wet pavement as
measured under controlled conditions on specified
government ...