BSW driving situations
Another vehicle approaching from behind
The Blind Spot Indicator light illuminates if a vehicle enters the detection zone from behind in an adjacent lane.
However, if the overtaking vehicle is traveling much faster than your vehicle, the indicator light may not illuminate before the detected vehicle is beside your vehicle. Always use the side and rear mirrors and turn and look in the direction your vehicle will move to ensure it is safe to change lanes.
If the driver activates the turn signal, then the Blind Spot Indicator light flashes and a chime will sound twice.
NOTE:
If the driver activates the turn signal before a vehicle enters the detection zone, the Blind Spot Indicator light will flash but no chime will sound when the other vehicle is detected.
Overtaking other vehicles
The Blind Spot Indicator light illuminates if you overtake a vehicle and that vehicle stays in the detection zone for approximately 3 seconds.
The camera unit may not detect slower moving vehicles if they are passed quickly.
If the driver activates the turn signal while another vehicle is in the detection zone, then the Blind Spot Indicator light flashes and a chime will sound twice.
See also:
Heated steering wheel (if so equipped)
The heated steering wheel system is designed
to operate only when the surface temperature of
the steering wheel is below 688F (208C).
Push the heated steering wheel switch to warm
the steering ...
Increasing fuel economy
● Keep your engine tuned up.
● Follow the recommended scheduled maintenance.
● Keep the tires inflated to the correct pressure.
Low tire pressure increases tire wear
and lowers ...
How to select menus on the screen
Models with navigation system
Models without navigation system
Vehicle functions are viewed on the display
screen in menus. To select each key item,
highlight the preferred item using the mult ...