Soft top care and cleaning (CrossCabriolet models)
Proper care and handling should be observed to maintain a good appearance of the soft top.
Improper care may cause the top cloth’s surface to stiffen, stain, or mat. Follow the instructions shown in this section.
It is not necessary to wash the soft top every time you wash the vehicle body, but clean the top regularly before it becomes quite dirty.
Leaving the soft top dirty or soiled for a long period will cause deterioration to the quality of the top material.
Remove dust or dirt on the soft top with a soft brush or sponge, then rinse it with plenty of clean water. When the top is quite dirty, wash using a mild detergent, such as a general cleaner especially made for a cloth top or a general purpose dish-washing liquid, mixed with clean, lukewarm (never hot) water. Rinse the top again with plenty of clean water to remove all traces of soap.
CAUTION
• Do not use strong household soap,
strong chemical detergents, gasoline
or solvents.
• If glass cleaner gets on the soft top,
immediately wash it off with clean
water.
• Do not apply direct water pressure,
such as high pressured water from
household hoses, on the lining of
the soft top and vehicle body, as this
may cause water to leak into the
inside of your vehicle.
After cleaning, always be sure the top and its storage are completely dry before opening the top. Opening the top while it is wet or damp may cause interior water damage, water stains or mildew on the top.
See also:
Measurement of weights
Secure loose items to prevent weight
shifts that could affect the balance of your
vehicle. When the vehicle is loaded, drive
to a scale and weigh the front and the rear
wheels separately to determ ...
Headlight control switch
Type A
Type B
Type C
Lighting
1 When turning the switch to the
position,
the front parking, tail, license plate and
instrument panel lights come on.
2 When turning the switch to the ...
Intelligent Key battery discharge
If the battery of the Intelligent Key is almost
discharged, the guide light B of the key port
A blinks and the indicator appears on the dot
matrix liquid crystal display. (See “Dot ...