Installing top tether strap (3rd row bench seat)
1. Top tether strap
2. Anchor point
WARNING
In the 3rd row bench seat, a child restraint with a top tether strap can only be used on the passenger side seating position. Do not place in the driver’s side seating position and attempt to angle the tether strap to the passenger side seating position.
The passenger side of the 3rd row bench seat is the seating position that can use a top tether strap.
First, secure the child restraint with the seat belt, as applicable.
1. Position the top tether strap 1 to the outboard
side of the head restraint as shown.
2. Secure the tether strap to the tether anchor
point 2 on the bottom of the seatback
behind the child restraint.
3. Tighten the tether strap according to the
manufacturer’s instructions to remove any
slack. Make sure the head restraint does not
contact the top tether strap.
If you have any questions when installing a top tether strap, consult your NISSAN dealer for details.
See also:
Steering wheel switch for audio control
1. Menu control switch/ENTER button
2. BACK switch
3. Volume control switch
4. Power on and SOURCE select switch
The audio system can be operated using the
controls on the steering wheel.
POW ...
System operation
The automatic drive positioner system will not
work or will stop operating under the following
conditions:
• When the vehicle speed is above 4 MPH
(7
km/h) (entry/exit function).
• When the ...
Jump starting
To start your engine with a booster battery, the instructions and precautions
below must be followed.
- If done incorrectly, jump starting can lead to a battery explosion, resulting
in severe i ...