Programming trouble-diagnosis
If the HomeLink® does not quickly learn the hand-held transmitter information:
● replace the hand-held transmitter batteries
with new batteries.
● position the hand-held transmitter with its
battery area facing away from the
HomeLink® surface.
● press and hold both the HomeLink® and
hand-held transmitter buttons without interruption.
● position the hand-held transmitter 1 -
3 inches (26 - 76 mm) away from the
HomeLink® surface. Hold the transmitter in
that position for up to 15 seconds. If
HomeLink® is not programmed within that
time, try holding the transmitter in another
position – keeping the indicator light in view
at all times.
If you have any questions or are having difficulty programming your HomeLink® buttons, refer to the HomeLink® web site at: www.homelink.com or call 1-800-355-3515.
See also:
Opening and closing windows with the mechanical key
The driver’s door key operation also allows you
to open and close the window that is equipped
with the automatic open/close function. (See
“Power windows” in the “2. Instruments and
contro ...
Cargo floor box (if so equipped for Hardtop
models)
Type A
Type A
1. To open the cargo floor box, pull the strap
A .
2. Remove the strapB from the back side of
the board and hang it on the lip of the lift
gate.
Type B
Type B
To open the ca ...
Liftgate release
WARNING
● Always be sure the liftgate has been
closed securely to prevent it from opening
while driving.
● Do not drive with the liftgate open. This
could allow dangerous exhaust gase ...