Automatic operation (if so equipped)
Tilt and telescopic operation
To adjust the steering wheel move the switch 1 in the following directions:
● Adjust the steering wheel forward or backward
in direction 3 to the desired telescopic
position.
● Adjust the steering wheel up or down in
direction 2 to the desired tilt position.
CAUTION
For vehicles with automatic drive positioner: Failure to reset the tilt and telescoping functions of the steering wheel, after the vehicle’s battery has been discharged, may prevent the steering wheel position from being adjusted.
For vehicles with automatic drive positioner: Both the tilt and telescopic steering operation must be reset after the vehicle’s battery has been discharged in order to prevent the tilt and telescopic operation from locking in one position. When the battery has been recharged or replaced, perform the following:
● For telescopic operation: Adjust the switch
1 so the steering wheel moves to the most
forward and backward position 3 that can
be reached.
● For tilt operation: Adjust the switch 1 so
the steering wheel moves to the highest
position 2 that can be reached.
Performing these operations resets the range of the steering wheel’s tilt and telescopic function.
Entry/Exit function
The automatic drive positioner system will make the steering wheel move up automatically when the driver’s door is opened and the ignition switch is in the LOCK position. This lets the driver get into and out of the seat more easily. The steering wheel moves back into position when the driver’s door is closed and the ignition switch is pushed.
For more information, see “Automatic drive positioner” in this section.
See also:
Doors
- Always have the doors locked while driving. Along with the use of seat belts,
this provides greater safety in the event of an accident by helping to prevent persons
from being thrown from the ...
HomeLink® universal transceiver (Type A) (if so equipped)
The Type A system does not have an IV 1 on the
back of the mirror. Move the mirror to see if the IV
is present. If the IV is not on the mirror, use the
procedure in this section to program the
H ...
Vanity mirror
To use the front vanity mirror, pull down the sun
visor and pull up the cover. ...