Making a call
To make a call, follow the procedure below:
1. Press the button on the
steering
wheel. The “Phone” screen will appear on
the display.
2. Select one of the following options to make a
call:
● Vehicle Phonebook: Select the name from
an entry stored in the vehicle phonebook.
● Handset Phonebook: Select the name from
an entry stored in the handset phonebook.
● Call History: Select the name from the incoming
or outgoing call history.
● Dial Number: Input the phone number manually
using a keypad displayed on the screen. For information on how to use the
touchscreen,
see “How to use the touchscreen” in
this section.
3. For all of the methods listed in Step 2 except
“Dial Number”, dialing commences when the
listed name is selected. Dialing commences
when “OK”is selected if the number is inputted
manually. The screen changes to the
“Call in Progress” screen.
4. After the call is over, perform one of the
following to finish the call:
a. Select the “Hang up” key on the Call in
Progress screen.
b. Press the switch on the
steering
wheel.
c. When the “Call in Progress” screen is
displayed, press the button on the
instrument panel to hang up. If any other
screen is currently displayed, press
the button to display the “Call in
Progress” screen first, then press
the button again to hang up.
See also:
Underbody
In areas where road salt is used in winter, the
underbody must be cleaned regularly. This will
prevent dirt and salt from building up and
causing the acceleration of corrosion on the
underbody and ...
Control panel buttons — color screen with Navigation System (if so equipped)
1. ZOOM OUT button*
2. CAMERA button**
3. DEST button*
4. ROUTE button*
5. NISSAN controller
6. STATUS button
7. INFO button
8. + (brightness control) button
9. OFF brightness control butto ...
Uniform tire quality grading
DOT (Department Of Transportation) Quality Grades: All passenger car tires must
conform to federal safety requirements in addition to these grades.
Quality grades can be found where applicable on t ...