Checking engine oil level
1. Park the vehicle on a level surface and apply
the parking brake.
2. Start the engine and let it idle until it reaches
operating temperature.
3. Turn off the engine. Wait more than
10 minutes for the oil to drain back into
the oil pan.
4. Remove the dipstick and wipe it clean. Reinsert
it all the way.
5. Remove the dipstick again and check the oil
level. It should be between the H (High) and
L (Low) marks B . This is the normal operating
oil level range. If the oil level is below
the L (Low) mark A , remove the oil filler cap
and pour recommended oil through the
opening. Do not overfill C .
6. Recheck oil level with the dipstick.
It is normal to add some oil between oil maintenance intervals or during the break-in period, depending on the severity of operating conditions.
CAUTION
Oil level should be checked regularly. Operating the engine with an insufficient amount of oil can damage the engine, and such damage is not covered by warranty.
See also:
Operating range
The Intelligent Key functions can only be used
when the Intelligent Key is within the specified
operating range.
When the Intelligent Key battery is almost discharged
or strong radio waves are ...
Manual operation
Fan speed control
Turn the “ ” fan speed control
dial to
manually control the fan speed.
Push the “AUTO” button to return to automatic
control of the fan speed.
Air recirculation
Pus ...
Spark plugs
Be sure the engine and ignition switch are off and that the parking brake
is engaged securely.
Be sure to use the correct socket to remove the spark plugs. An incorrect
socket can damage the ...