How to use brightness control and display ON/OFF button
Push the “
OFF” button to switch
the display
brightness to the daytime mode or the nighttime
mode, and to adjust the display brightness using
the multi-function controller while the indicator is
displayed at the bottom of the screen.
The display brightness can also be adjusted using the brightness UP button (+) or brightness DOWN button (−).
Push and hold the “
OFF” button for
more
than 2 seconds to turn the display off. Push the
button again to turn the display on.
See also:
Heated rear seats (if so equipped)
WARNING
Do not use or allow occupants to use the
seat heater if you or the occupants cannot
monitor elevated seat temperatures or
have an inability to feel pain in body parts
that contact the sea ...
Engine block heater (if so equipped)
Engine block heaters are used to assist with cold
temperature starting.
The engine block heater should be used when
the outside temperature is 20°F (-7°C) or lower.
WARNING
● Do not use ...
Lift gate
- Always be sure the lift gate has been closed securely to prevent it from
opening while driving.
- Do not drive with the lift gate open.
This could allow dangerous exhaust gases to be drawn int ...