Doors

- Always have the doors locked while driving. Along with the use of seat belts,

- Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintentionally opening the doors, and will help keep out intruders.

- Before opening any door, always look for and avoid oncoming traffic.

- Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls.

Unattended children could become involved in serious accidents.

Locking with key

Locking with key
Locking with key

The power door lock system allows you to lock or unlock all doors simultaneously.

- Turning the driver’s door key cylinder to the front of the vehicle 1 will lock all doors and the lift gate.

- Turning the driver’s door key cylinder once to the rear of the vehicle 2 will unlock the driver’s door. After returning the key to the neutral position, turning it to the rear again within 5 seconds will unlock all doors and the lift gate.

Locking with inside lock knob

Locking with inside lock knob
Locking with inside lock knob

To lock the door without the key, move the inside lock knob to the lock position 1 then close the door.

To unlock, move the inside lock knob to the unlock position 2 .

When locking the door without a key, be sure not to leave the key inside the vehicle.

Locking with power door lock switch

Locking with power door lock switch
Locking with power door lock switch

Operating the power door lock switch will lock or unlock all the doors. The switches are located on the driver’s and front passenger’s door armrests.

To lock the doors, push the power door lock switch to the lock position 1 with the driver’s or front passenger’s door open, then close the door.

When locking the door this way, be sure not to leave the key inside the vehicle.

To unlock the doors, push the power door lock switch to the unlock position 2 .

Lockout protection

When the power door lock switch (driver or front passenger) is moved to the lock position with the key in the ignition switch or the Intelligent Key in the vehicle and any door open, all doors will lock and unlock automatically.

This function helps to prevent the keys from being accidentally locked inside the vehicle.

Automatic door locks

- All doors lock automatically when the vehicle speed reaches 15 MPH (24 km/h).

- All doors unlock automatically when the ignition switch is placed in the OFF position.

The automatic unlock function can be deactivated or activated. To deactivate or activate the automatic door unlock system, perform the following procedure:

1. Close all doors.

2. Place the ignition switch in the ON position.

3. Within 20 seconds of performing Step 2, push and hold the power door lock switch to the more than 5 seconds. position (UNLOCK) for more than 5 seconds.

4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once.

5. The ignition switch must be placed in the OFF and ON position again between each setting change.

When the automatic door unlock system is deactivated, the doors do not unlock when the ignition switch is placed in the OFF position. To unlock the door manually, use the inside lock knob or the power door lock switch (driver’s or front passenger’s side).

Child safety rear door lock

Child safety rear door lock
Child safety rear door lock

Child safety rear door locks help prevent the rear doors from being opened accidentally, especially when small children are in the vehicle.

When the levers are in the lock position 1 , the rear doors can be opened only from the outside.

To disengage, move the levers to the unlock position 2 .

    See also:

    Power outlet
    Instrument panel Center console (if so equipped) The power outlet is located in the instrument panel and the center console (if so equipped). - The outlet and plug may be hot during or imme ...

    Before operating the top
    The soft top of this vehicle is electrically operated. You can fully open or close the top only by pressing the operating switch located on the center console. Only operate the soft top operatin ...

     OFF button
    To change the display brightness, press the OFF button. Pressing the button again will change the display to the day or the night display. The brightness can then be adjusted using the NI ...