How to use the vehicle information display

The vehicle information display can be changed

The vehicle information display can be changed using the buttons on and ENTER located on the steering wheel.

1. information — select/enter the Vehicle information menu items or to change from one display screen to the next (i.e. trip, TPMS, Fuel economy)
2. vehicle — navigate through the items in vehicle information ENTER — change or select an item in the vehicle information display
3.The ENTER and buttons also — go back to the previous menu

The ENTER and control audio buttons also control audio and control panel functions. For additional information see, “Steering wheel switch for audio control” in “Monitor, climate, audio, phone and voice recognition systems” section.

    See also:

    Rear-facing child restraint installation using the seat belts
    WARNING • The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not ...

    Replacing
    Replace the wiper blades if they are worn. 1. Lift the wiper arm away from the windshield. 2 Push the release tab, then move the wiper blade down the wiper arm to remove. 3 Remove the wiper ...

    Maintenance precautions. Engine compartment check locations
    Maintenance precautions Whenever you inspect or perform maintenance on your Nissan Murano, work carefully and follow appropriate safety procedures to reduce the risk of accidental injury or vehicle ...