Luggage hooks

When securing items using luggage hooks located

When securing items using luggage hooks located on the back of the seat or side finisher do not apply a load over more than 6.5 lbs (29 N) to a single hook.

The luggage hooks that are located on the floor should have loads less then 110 lbs (490 N) to a single hook.

The luggage hooks can be used to secure cargo with ropes or other types of straps.

WARNING

● Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury.
● Use suitable ropes and hooks to secure cargo.
● Never allow anyone to ride in the luggage area. It is extremely dangerous to ride in a cargo area inside of a vehicle.

In a collision, people riding in these areas are more likely to be seriously injured or killed.
● Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
● The child restraint top tether strap may be damaged by contact with items in the cargo area. Secure any items in the cargo area. Your child could be seriously injured or killed in a collision if the top tether strap is damaged.
● Be sure everyone in your vehicle is in a seat and using a seat belt properly.

    See also:

    Precautions when starting and driving
    - Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. They could accidentally injure themselves or other ...

    Power inverter switch (if so equipped)
    To use the outlets for devices that require 120v power, place the ignition in the ON position and push the power inverter switch. The switch will illuminate when enabled. CAUTION ● Use ...

    Fog light switch (if so equipped)
    To turn the fog lights on, turn the headlight switch to the position, then turn the switch to the position. To turn them off, turn the switch to the OFF position. The headlights must be on ...