Antenna
The antenna cannot be shortened, but can be removed. When you need to remove the antenna, turn the antenna rod counterclockwise B .
To install the antenna rod, turn the antenna rod clockwise A and hand tighten.
CAUTION
Always properly tighten the antenna rod during installation or the antenna rod may break during vehicle operation.
See also:
Changing a flat tire (Hardtop models)
If you have a flat tire, follow the instructions
below.
Stopping the vehicle
1. Safely move the vehicle off the road and
away from traffic.
2. Turn on the hazard warning flashers.
3. Park on a ...
Emission control information label
The emission control information label is attached
to the underside of the hood as shown. ...
Vehicle Dynamic Control (VDC) OFF switch
Vehicle Dynamic Control (VDC) OFF switch
The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on
for most driving conditions.
If the vehicle is stuck in mud or snow, the VD ...