Capacities and recommended fuel/lubricants
The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity.

*1: For further details, see “Engine oil and oil filter recommendations” in this section.
*2: NISSAN recommends Genuine NISSAN Ester Oil available at a NISSAN dealer.
*3: Use only Genuine NISSAN CVT Fluid NS-3. Using transmission fluid other than Genuine NISSAN CVT Fluid NS-3 will damage the CVT, which is not covered by the NISSAN new vehicle limited warranty. *4: Use of power steering fluid other than Genuine NISSAN E-PSF will prevent the power steering system from operating properly.
*5: Available in mainland USA through a NISSAN dealer.
*6: For further details, see “Air conditioner system refrigerant and oil recommendations” in this section.
*7: For further details, see “Engine Oil” in the “Maintenance and do-it-yourself” section of this manual.
*8: The use of differential gear oil other than the specified may cause vehicle malfunctions and result in non-warranty vehicle repairs.
- Fuel recommendation
- Engine oil and oil filter recommendations
- Air conditioner system refrigerant and oil recommendations
See also:
Battery
Basic information
No exposed flames, no sparks
WARNING Do not expose the battery to open flames, electrical sparks, or any
other ignition source. Hydrogen gas produced by the ...
Starting the engine
Basic Information
1. Apply the parking brake securely before attempting to start the engine. This helps keep the Nissan Murano
stationary throughout the starting procedure.
2. Place the shift p ...
Push-button ignition switch operation
When the ignition switch is pushed without
depressing the brake pedal, the ignition switch
position will change as follows:
• Push center once to change to ACC.
• Push center two times to ch ...
