Emission control information label

The emission control information label is attached to the underside of the hood as shown.
See also:
Replacing
Replace the wiper blades if they are worn.
1. Lift the wiper arm away from the windshield.
2. Push and hold the release tab A , and
move the wiper blade down the wiper arm
1 .
3. Insert t ...
Jump starting
To start your engine with a booster battery, the
instructions and precautions below must be followed.
WARNING
● If done incorrectly, jump starting can
lead to a battery explosion, resulting ...
Compass (if so equipped)
When the ignition switch is turned to the ON position, the compass display
B will indicate the direction of the vehicle’s heading.
If the display reads “C”, calibrate the compass by drivi ...
