See also:

Clearing the programmed information
Individual buttons cannot be cleared. However, to clear all programming, press and hold the two outside buttons and release when the indicator light begins to flash (approximately 20 seconds). ...

Checking engine coolant level
Check the coolant level in the reservoir when the engine is cold. If the coolant level is below the MIN level, add coolant to the MAX level. If the reservoir is empty, check the coolant level in ...

Drive belts
1. Alternator 2. Water pump 3. Drive belt auto-tensioner 4. Crankshaft pulley 5. Air conditioner compressor Be sure the ignition switch is in the OFF or LOCK position before servicing drive ...