Heated steering wheel (if so equipped)
The heated steering wheel system is designed to operate only when the surface temperature of the steering wheel is below 688F (208C).
Push the heated steering wheel switch to warm the steering wheel after the engine starts. The indicator light1 on the switch will illuminate.
If the surface temperature of the steering wheel is below 688F (208C), the system will heat the steering wheel and cycle off and on to maintain a temperature above 688F (208C). The indicator light will remain on as long as the system is on.
Push the switch again to turn the heated steering wheel system off manually. The indicator light will turn off.
NOTE:
If the surface temperature of the steering wheel is above 688F (208C) when the switch is turned on, the system will not heat the steering wheel. This is not a malfunction.
See also:
Vehicle loading information
WARNING
● It is extremely dangerous to ride
in a cargo area inside a vehicle. In
a collision, people riding in these
areas are more likely to be seriously
injured or killed.
● Do not ...
System operation
The automatic drive positioner system will not
work or will stop operating under the following
conditions:
• When the vehicle speed is above 4 MPH
(7
km/h) (entry/exit function).
• When the ...
Underbody
In areas where road salt is used in winter, the
underbody must be cleaned regularly. This will
prevent dirt and salt from building up and
causing the acceleration of corrosion on the
underbody and ...