Cigarette lighter and ashtray (if so equipped)
To open the ashtray lid, push the lid down and release it1 .
To empty the ashtray, pull out2 .
The cigarette lighter operates when the ignition switch is in the ON position.
Push the lighter in all the way3 , then release it. When the lighter is heated, it will spring out.
Return the lighter to its original position after use.
CAUTION
• The cigarette
lighter socket is a
power source for the cigarette lighter
element only. The use of the
cigarette lighter socket as a power
source for any other accessory is
not recommended.
• Do not use any
other power outlet
for an accessory lighter.
See also:
Push starting
CAUTION
● CVT models cannot be push-started or
tow-started. Attempting to do so may
cause transmission damage.
● Do not push start this vehicle. The
three-way catalyst may be damaged. ...
Operating power lift gate (if so equipped)
To operate the power lift gate, the shift lever
must be in the P (Park) position.
The power lift gate will not operate if the battery
voltage is low.
Power lift gate main switch
The power lif ...
Canceling a remote start
To cancel a remote start, perform one of the
following:
● Aim the Intelligent Key at the vehicle and
press and hold until the parking
lights
turn off.
● Turn on the hazard warning ...