See also:

Readiness for Inspection/Maintenance (I/M) test
WARNING A vehicle equipped with All-Wheel Drive (AWD) should never be tested using a two wheel dynamometer (such as the dynamometers used by some states for emissions testing), or similar equipme ...

Power steering fluid
Check the fluid level in the reservoir. The fluid level should be checked using the HOT range (1 : HOT MAX.,3 : HOT MIN.) at fluid temperatures of 122 to 1768F (50 to 808C) or using the COLD r ...

Heated seats (if so equipped)
The front seats are warmed by built-in heaters. 1. Start the engine. 2. Push the LO or HI position of the switch, as desired. The indicator light in the switch will illuminate. The heater is ...