Daytime running light system (Canada only)
The daytime running lights automatically illuminate
when the engine is started with the parking
brake released. The daytime running lights operate
with the headlight switch in the OFF position
or in the
position. Turn the
headlight switch
to the
position for full
illumination when
driving at night.
If the parking brake is applied before the engine is started, the daytime running lights do not illuminate.
The daytime running lights illuminate when the parking brake is released. The daytime running lights will remain on until the ignition switch is placed in the OFF position.
WARNING
When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others.
See also:
Operating tips
• When the shift lever is shifted to the
R
(Reverse) position, the monitor screen automatically
changes to the RearView Monitor
mode. However, the radio can be heard.
• When the temperature ...
Remote starting the vehicle
To use the remote start feature to start the engine
perform the following:
1. Aim the Intelligent Key at the vehicle.
2. Press the LOCK button to lock all
doors.
3. Within 5 seconds press and hol ...
BSW system operation
Blind Spot Indicator light
BSW light (orange, green)
The BSW system operates above approximately
20 MPH (32 km/h).
When the camera unit detects vehicles in the
detection zone, the Blind Spo ...
