OFF button
To change the display brightness, press
the 
OFF button. Pressing the button
again
will change the display to the day 
or the
night 
display. The brightness can
then be
adjusted using the NISSAN controller.
The display brightness can also be adjusted using the + (brighter) button or the (dimmer) button.
If no operation is done within 10 seconds, the display will return to the previous display.
Press and hold the 
OFF button for
more
than 2 seconds to turn the display off. Press the
button again to turn the display on.
See also:
Intelligent 4WD (if so equipped)
4x4i system operation
4WD shift switch
The Four-Wheel Drive (4WD) system is used to
select the 2WD (Two-Wheel Drive), AUTO or
LOCK mode depending on the driving conditions.
Turn the 4WD mode ...
Extended storage switch
The extended storage switch is used during vehicle shipping and long storage preparation. In the Nissan Murano,
this switch is located in the fuse panel below the steering column and above the p ...
Starting the engine
1. Apply the parking brake.
2. Move the shift selector to P (Park) or N
(Neutral). P (Park) is recommended.
The starter is designed not to operate if
the shift selector is in any of the driving
p ...