Predictive course line settings
To turn on or off the predictive course line display, press the SETTING button, select the “Camera” key and press the ENTER button.
Predictive Course Lines:
When this item is turned on, the predictive course lines will be displayed on the monitor when the shift selector is the R (Reverse) position.
See also:
If the top does not open or close electrically
If you cannot operate the soft top with the
operating switch, first check whether all the
following operating conditions are met.
• Vehicle is stopped
• Ignition switch is ON (Run the engine w ...
To protect your vehicle from corrosion
● Wash and wax your vehicle often to keep the
vehicle clean.
● Always check for minor damage to the paint
and repair it as soon as possible.
● Keep drain holes at the bottom of t ...
Engine compartment
CAUTION
Never use a fuse of a higher or lower
amperage rating than specified on the
fuse box cover. This could damage the
electrical system or cause a fire.
If any electrical equipment does not ...