How to read the displayed lines

Guiding lines which indicate the vehicle width

Guiding lines which indicate the vehicle width and distances to objects with reference to the vehicle body line  A are displayed on the monitor.

Distance guide lines:

Indicate distances from the bumper.

Red line1 : approx. 1.5 ft (0.5 m)
Yellow line2 : approx. 3 ft (1 m)
  Green line3 : approx. 7 ft (2 m)
Green line4 : approx. 10 ft (3 m)

Vehicle width guide lines5 :

Indicate the vehicle width when backing up.

Predictive course lines6 :

Indicate the predictive course when backing up.

The predictive course lines will be displayed on the monitor when the shift lever is in the R (Reverse) position and the steering wheel is turned. The predictive course lines will move depending on how much the steering wheel is turned and will not be displayed while the steering wheel is in the neutral position.

    See also:

    Opening the top
    1. Start the engine. 2. Push OPEN on the soft top operating switch and hold it until the top is fully opened. • The soft top indicator light will illuminate while the top is in motion. (In a ...

    All-Wheel Drive (AWD) lock switch operations
    The AWD LOCK switch is located on the lower side of the instrument panel (CrossCabriolet models) or on the center console (Hardtop models). This switch is used to select the AUTO or LOCK mode de ...

    Towing your vehicle
    When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed. Incorrect towing equipment could damage your vehicle. Towing instructions are available ...