Power steering fluid

Check the fluid level in the reservoir.

Check the fluid level in the reservoir.

The fluid level should be checked when the fluid is cold at fluid temperatures of 32 to 86ºF (0 to 30ºC). The fluid level can be checked with the level gauge which is attached to the cap. To check the fluid level, remove the cap. The fluid level should be between the MAX 1 and MIN 2 lines.

If the fluid is below the MIN 2 line, add Genuine NISSAN E-PSF. Remove the cap and fill through the opening.

CAUTION

● Do not overfill.
● Use of a power steering fluid other than Genuine NISSAN E-PSF will prevent the power steering system from operating properly.
● Power steering fluid is poisonous and should be stored carefully in marked containers out of the reach of children.

    See also:

    Warning/Indicator lights (other)
    Automatic brake hold indicator light (white/green) This light shows the current status of the Automatic brake hold system, allowing the driver to see at a glance whether the feature ...

    Extending engine run time
    The remote start feature can be extended one time by performing the steps listed in “Remote starting the vehicle” in this section. Run time will be calculated as follows: ● The first 10 ...

    Operating the HomeLink® universal transceiver
    The HomeLink® Universal Transceiver, after it is programmed, can be used to activate the programmed device. To operate, simply press and release the appropriate programmed HomeLink® Universal Tr ...