Installing top tether strap (3rd row bench seat)
1. Top tether strap
2. Anchor point
WARNING
In the 3rd row bench seat, a child restraint with a top tether strap can only be used on the passenger side seating position. Do not place in the driver’s side seating position and attempt to angle the tether strap to the passenger side seating position.
The passenger side of the 3rd row bench seat is the seating position that can use a top tether strap.
First, secure the child restraint with the seat belt, as applicable.
1. Position the top tether strap 1 to the outboard
side of the head restraint as shown.
2. Secure the tether strap to the tether anchor
point 2 on the bottom of the seatback
behind the child restraint.
3. Tighten the tether strap according to the
manufacturer’s instructions to remove any
slack. Make sure the head restraint does not
contact the top tether strap.
If you have any questions when installing a top tether strap, consult your NISSAN dealer for details.
See also:
Hood
- Make sure the hood is completely closed and latched before driving.
Failure to do so could cause the hood to fly open and result in an accident.
- If you see steam or smoke coming from the engin ...
Parking/parking on hills
- Do not stop or park the vehicle over flammable materials such as dry grass,
waste paper or rags. They may ignite and cause a fire.
- Safe parking procedures require that both the parking brak ...
Changing engine oil and filter
Change the engine oil and filter according to the
maintenance log shown in the NISSAN Service
and Maintenance Guide.
Vehicle set-up
1. Park the vehicle on a level surface and apply
the parking ...